Procurement

Our Company is looking for opportunity to buy the Polypropylene with the followings specifications:
Requirements
Grade Polypropylene Random Copolymer
Melt flow rate (230C/2.16 kg) not less than 70 g/10 min
Flexural modulus (5 mm/min) not less than 1000 MPa
Viscat Softening Temperature (10N) not less than 130C
Usage Injection moulding


Requirements
Grade Polypropylene Impact Copolymer
Melt flow rate (230C/2.16 kg) not less than 35 g/10 min
Flexural modulus (5 mm/min) not less than 850 MPa
Viscat Softening Temperature (10N) not less than 140C
Usage Injection moulding


Requirements
Grade Polypropylene Homopolymer
Melt flow rate (230C/2.16 kg) not less than 55 g/10 min
Flexural modulus (5 mm/min) not less than 1800 MPa
Viscat Softening Temperature (10N) not less than 153C
Usage Injection moulding


Requirements
Grade Polypropylene Homopolymer
Melt flow rate (230C/2.16 kg) not less than 120 g/10 min
Flexural modulus (5 mm/min) not less than 1450 MPa
Viscat Softening Temperature (10N) not less than 150C
Usage Injection moulding


This template supports the sidebar's widgets. Add one or use Full Width layout.